Description
D10C Mark4 V2 10inch 427mm FPV Racing Freestyle Drone Frame Kit F4 Flight Control 60A 4IN1 ESC 3115 900KV Motor 10in Propeller
D10C Mark4 V2 10inch 427mm FPV Racing Freestyle Drone Frame Kit F4 Flight Control 60A 4IN1 ESC 3115 900KV Motor 10in Propeller
D10C Combo Set:
1Set x Mark4 V2 10inch 427mm Carbon Fiber frame (unassembled)
4PCS x YSIDO 3115 900KV Brushless Motor
1PCS x F4 Flight Control Board
1PCS x 60A BLheli_S 4In1 ESC
2Pairs x 1050 3-blades Propeller
1PCS x Battery Strap
D10CR Combo Set:
1Set x Mark4 V2 10inch 427mm Carbon Fiber frame (unassembled)
4PCS x YSIDO 3115 900KV Brushless Motor
1PCS x F4 Flight Control Board
1PCS x 60A BLheli_S 4In1 ESC
2Pairs x 1050 3-blades Propeller
1PCS x Battery Strap
1PCS x 915mHz Elrs Receiver
Mark4 V2 10Inch 427mm Carbon Fiber Frame:
Parameters:
Frame structure: X-Type
Wheelbase: 427mm
Size: 268.18mm*332.07mm
Bottom plate thickness: 3.0mm
Medium plate thickness: 3.0mm
Upper plate thickness: 2.0mm
Arm thickness: 7.5mm
Connecting plate: 2.0mm
Camera side plate thickness: 2.5mm
Camera installation hole spacing: 19mm
Image transmission installation hole spacing: 20*20mm & 30.5*30.5mm
Flight control installation hole spacing: 20*20mm & 30.5*30.5mm
Inner space height: 35mm
Motor installation hole position: 16*16mm & 19*19mm
FAQ
Does F4 flight control support the traditional aircraft model remote controller?
F4 flight control only supports receivers in sbus or ppm mode and also supports receivers in crsf protocol such as TBS receiver and ELRS receiver; Traditional pwm receiver is not supported.
Does F4 flight control support GPS fixed points?
F4V3plus flight control supports inav firmware and GPS with magnetic compass can achieve fixed-point function.
Does F4V3plus flight control support rescue mode?
Support.
Can F4V3plus flight control be connected to DJI O3 air unit?
It can be connected to O3 air unit but it needs to be connected by welding wires. There is no separate air unit interface.
What is the model of F4V3plus flight control and tower chip?
The main control chip uses F405.
Do I need to insert a memory card for F4V3plus flight control parameter adjustment?
No you can adjust the parameters by connecting the data cable directly to the computer.
“
Reviews
There are no reviews yet.