Sale!

75MM-66-without IR – New OV2640 Camera Module ESP32 CAM 2.4G WiFi

Original price was: $ 16.31.Current price is: $ 11.65.

Your purchase is protected by Stripe and PayPal. If you don't get your order, you'll receive a full refund. Shop safely.

75MM-66-without IR – New OV2640 Camera Module ESP32 CAM 2.4G WiFi

50 in stock

SKU: d4518669324_24 Category: Tags: , , , , , , , , ,

Description

New OV2640 Camera Module for ESP32 CAM 2.4G Wifi Module 200 222 30 45 120 160 Degrees 850nm Night Vision DVP 24PIN 0.5MM 2MP

The OV2640 image sensor has 2 million pixels (1632×1232 pixels) its size is small the working voltage is low and it provides all the functions of a single-chip UXGA camera and image processor. Through SCCB bus control it can output 10-bit sampling data of various resolutions in the form of whole frame sub-sampling windowing etc. The maximum UXGA image of this product is 15 frames per second. The user can fully control the image quality data format and transmission method. All image processing functions including gamma curve white balance saturation chroma etc. can be programmed through the SCCB interface. OmmiVision image sensor uses unique sensor technology to improve image quality and obtain clear and stable color images by reducing or eliminating optical or electronic defects such as fixed pattern noise tailing floating etc.

● High sensitivity suitable for low illumination applications

● Low voltage suitable for embedded applications

● Standard SCCB interface compatible with I2C interface

●RawRGB RGB (GRB4:2:2 RGB565/555/444) YUV (4:2:2) and YCbCr (4:2:2) output formats

● Support UXGA SXGA VGA QVGA QQVGA CIF QCIF and various sizes up to 40×30

● Support VarioPixel sub-sampling method

● Automatic influence control functions include: automatic exposure control automatic gain control automatic white balance automatic elimination of light streaks automatic black level calibration. Image quality control includes color saturation hue gamma sharpness ANTI_BLOOM

●ISP has the function of noise elimination and dead pixel compensation

● Support image zoom

● Lens loss compensation

● Saturation automatic adjustment

● Automatic adjustment of edge enhancement

● Automatic adjustment of noise reduction

key parameter

Photosensitive array 1632×1232 Maximum format UXGA

IO voltage 1.7V-3.3V analog voltage 2.5-3.0v (internal LDO powers the core 1.2V)

Power consumption working TBD sleep <20μA

Temperature operation -30℃ to 70℃

Stable working 0℃ to 50℃

Output format (8 bits) YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data

Optical size 1/4″

Field of view 66/120/160 degrees

Maximum frame rate 15fps SXGA

Sensitivity 1.3V/(Lux-sec)

S/N ratio 40 dB

Dynamic range 50 dB

Browse mode line by line

Electronic exposure 1 line to 1247 lines

Pixel area 2.2μm x 2.2μm

Dark current 15mV/s at 60℃

75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi

75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi 75MM-66-without IR - New OV2640 Camera Module ESP32 CAM 2.4G WiFi

Reviews

There are no reviews yet.

Be the first to review “75MM-66-without IR – New OV2640 Camera Module ESP32 CAM 2.4G WiFi”

Your email address will not be published. Required fields are marked *