Description
BETAFPV ELRS Micro 2.4GHz Receiver 5CH PWM Outputs CRSF Compatible for RC FPV Fixed-Wing Aircraft Cars Boats Helicopter
BETAFPV Micro receiver is based on the ExpressLRS project an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds latency and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
A ton of ExpressLRS items are available now!
ExpressLRS PWM Receivers
ExpressLRS now supports direct PWM output from receivers that have been specifically designed for this mode. BETAFPV ELRS Micro receiver features PWM output for the application of fixed-wing helicopters RC cars boats and etc and supports failsafe function which can protect RC models from being out of control. Besides the plug-and-play design makes it very easy and friendly to use.
Note: To work with PWM receiver please make sure the TX and RX firmware is ELRS V2.0.0.
Comparision in BETAFPV ELRS Receivers
What is the major difference between Micro receiver Nano receiver and Lite receiver?
Micro receiver is the first ELRS receiver with PWM output on BETAFPV. It is widely used in fixed-wing helicopters RC cars boats and etc. Weighing about 4.5g with an antenna means that a FPV drone can not afford to carry. With the plug-and-play connect ports Micro receive is very easy to use and does not need to solder.
Nano receiver (2.4G version) is the first and (so far) the only receiver with power amplifier (PA+LNA). It has 100mW telemetry output and better sensitivity when longer range. Lite receiver doesn’t have a PA/LNA on them so its telemetry power is as what the RF chip SX1280 came with 17mW.
Beside Nano receiver comes with normal external Dipole T antenna. Lite receiver has SMD ceramic antenna and in theory it is not so long range.
Micro receiver is used for fixed-wing helicopter RC cars and boats. High recommend the Nano or Lite receiver to build on a drone. Especially on 65-85mm whoop drones with limited space and need lightweight Lite receiver is a better choice.
Micro Receiver |
Nano Receiver |
Lite Receiver |
|
Weight |
4.5g with antenna |
0.7g (RX only) |
0.47g (Tower) 0.53g (Flat) |
Antenna |
IPEX MHF + T antenna |
IPEX MHF + T antenna |
Integrated SMD ceramic antenna |
MCU |
ESP8285 SX1280 SX1281 |
ESP8285 SX1281 or SX1276 |
ESP8285 SX1280 |
Frequency |
2.4GHz |
2.4GHz 915MHz (FCC) 868MHz (EU) |
2.4GHz |
Telemetry Power |
17mW |
100mW |
17mW |
Serial Output Protocol |
PWM or CRSF |
CRSF |
CRSF |
Model Type |
Fixed-wing aircraft Helicopter RC Cars RC Boats |
FPV Drone |
Whoop Drone |
Specification
-
Item: BETAFPV ELRS Micro Receiver
-
Weight: 4.5g (with antenna)
-
Antenna: IPEX MHF + T antenna (recommend 80mm Dipole T Antenna)
-
PWM channel: 5 channels
-
Serial output protocol: PWM or CRSF
-
Size: 19mm*32mm*9mm (without antenna)
-
MCU: ESP8285/SX1280/SX1281
-
Telemetry power: 12.5dbm/17mW
-
Frequency bands: 2.4GHz ISM
-
Input voltage: 5V~9V DC @ ”+” pad
-
Default firmware version: ExpressLRS v2.0
-
Adapted RC Model Type: Multirotors Fixed-wing aircraft Helicopters RC Cars RC Boats and etc.
Diagram
Below is the diagram for ELRS Micro receiver.
Note: The firmware version of the micro receiver manufactured by
Reviews
There are no reviews yet.