D10C Mark4 V2 10inch 427mm FPV Racing Freestyle Drone Frame Kit F4 Flight Control 60A 4IN1 ESC 3115 900KV Motor 10in Propeller

D10C Combo Set:

1Set x Mark4 V2 10inch 427mm Carbon Fiber frame (unassembled)

4PCS x YSIDO 3115 900KV Brushless Motor

1PCS x F4 Flight Control Board

1PCS x 60A BLheli_S 4In1 ESC

2Pairs x 1050 3-blades Propeller

1PCS x Battery Strap

D10CR Combo Set:

1Set x Mark4 V2 10inch 427mm Carbon Fiber frame (unassembled)

4PCS x YSIDO 3115 900KV Brushless Motor

1PCS x F4 Flight Control Board

1PCS x 60A BLheli_S 4In1 ESC

2Pairs x 1050 3-blades Propeller

1PCS x Battery Strap

1PCS x 915mHz Elrs Receiver

Mark4 V2 10Inch 427mm Carbon Fiber Frame:

Parameters:

Frame structure: X-Type

Wheelbase: 427mm

Size: 268.18mm*332.07mm

Bottom plate thickness: 3.0mm

Medium plate thickness: 3.0mm

Upper plate thickness: 2.0mm

Arm thickness: 7.5mm

Connecting plate: 2.0mm

Camera side plate thickness: 2.5mm

Camera installation hole spacing: 19mm

Image transmission installation hole spacing: 20*20mm & 30.5*30.5mm

Flight control installation hole spacing: 20*20mm & 30.5*30.5mm

Inner space height: 35mm

Motor installation hole position: 16*16mm & 19*19mm

FAQ

Does F4 flight control support the traditional aircraft model remote controller?

F4 flight control only supports receivers in sbus or ppm mode and also supports receivers in crsf protocol such as TBS receiver and ELRS receiver; Traditional pwm receiver is not supported.

Does F4 flight control support GPS fixed points?

F4V3plus flight control supports inav firmware and GPS with magnetic compass can achieve fixed-point function.

Does F4V3plus flight control support rescue mode?

Support.

Can F4V3plus flight control be connected to DJI O3 air unit?

It can be connected to O3 air unit but it needs to be connected by welding wires. There is no separate air unit interface.

What is the model of F4V3plus flight control and tower chip?

The main control chip uses F405.

Do I need to insert a memory card for F4V3plus flight control parameter adjustment?

No you can adjust the parameters by connecting the data cable directly to the computer.