S500 PCB 500mm Upgrade F450 Quadcopter Frame Kit w/Landing Gear MINI S800 EVO Design
Features:
– F450 upgrade quadcopter
– Learned arm design from DJI S800 EVO and enhanced
– good work with Gopro Hero 3 2 Axis brushless gimbal for FPV
– PCB Center plate with solder point
– high quality carbon fiber landing gear
– Frame only no electronic parts.
Specifications:
– Wheelbase: 500mm
– Motor suggest: 2212 KV980; 2216 KV880 KV900; 3108 900KV
– Prop suggest: 1045/1047/1147/1238
– Battery suggest: 3S-4S 2200mAh-5200mAh (not include)
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART I2C SPI CAN);
4. The integrated backup power and backup controller fails the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4 with hardware floating-point processing unit
2. frequency: 168MHZ 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
40A 2-6S ESC Specification:
Li-ion/Li0poly:2-6S
Size: about 7.2×2.4cm (ESC with banana connector)
Weight: about 33.2g(with cable);
2212 920KV:
Type : 22 x 12mm
KV: 920kv
Color:Red
Fit for DJI Phantom F330 F450 F550 X525
Flysky i6 with ia6 receiver Remote control x 1
(send it as your choice)
S500 PCB frame kit
with carbon fiber landing gear
(unassmebled)
Pixhawk 2.4.8 32bit ARM Flight Controller x 1
I2C X 1
PPM X 1
RGB X 1
Shock Absorber x 1
2212 920kv motor x 4
plastics motor protection cover x 4
ReadytoSky 40A esc x4
Safety button and Buzzer x 1
M8N GPS w/ holder x 1
gps holder x 1
4G TF card(IO firmware has written) x1
Reviews
There are no reviews yet.