VIFLY Whoop Series Board Balance Charging 6 Port 1S LIPO Battery XT60 Input for PH2.0 BT2.0 / GNB27 FPV Tinywhoop

Description

VIFLY Whoop Series Board Balance Charging 6 Port 1S LIPO Battery XT60 Input for PH2.0 BT2.0 / GNB27 FPV Tinywhoop

 

Operation

Firstly turn the knob to the corresponding position according to the battery quantity

you will charge then plug-in the batteries in sequence “1S-2S-3S…” finally connect the series board to the charger with cables.

Example: You have 3 whoop batteries to charge firstly turn the knob to “3S” position then plug the battery into port 1S 2S and 3S in sequence and finally connect it to the charger with the balance cable and XT60 cable

 

1.  Knob

2.  1S Lipo Battery Ports

3.  Fuse

 

Warning

It is series board not parallel board. For example when you are charging 4pcs 300mAh lipos set your charger to 0.3A for 1C or 0.6A for 2C. NOT 1.2A or 2.4A.

 

The specs of all batteries should be the same ie battery capacity battery type brand etc.

 

 

Never leave the board unattended while charging or discharging.

 

Do not charge over 1.5amps. The fuse is 5A that not means you can charge it in 5A the knob is rated for 1.5A so don’t charge it over 1.5A.

 

Don’t plug in both PH2.0 and BT2.0/GNB27 battery in the same port.

 

Specs

Dimensions : 73*39*33mm

Weight :49g

Battery type : PH2.0 & BT2.0 / GNB27

Max charging current : 1.5A

“