FLAMMA FV02 Vocal Doubling Effects Processor Support 48V Phantom Power with Multiple Vocal Modes Two Outpute Modes

FLAMMA FV02 Vocal Doubling Effects Processor support 48V Phantom Power with Multiple Vocal Modes Two Outpute Modes

Features

●Choose between single or multiple vocal modes

●Built-in vocal reverb effects

●Switch between three different tone modes with the press of a button

●Includes guitar input with optional guitar reverb effect

●Can optionally be powered by 48v phantom power
●Line-in function supports signal from an external microphone amplifier or FV series pedals

●Two different output modes for mixed signal or individual signal from guitar and microphone

Chorus Effects

The FV02 includes five different chorus effects

1.Unison: Unison chorus

2.Oct: Lower octave chorus

3.Oct+: Upper octave chorus

4.Group1“: Multi-voice” chorus 1

5.Group“: Multi-voice” chorus 2

Reverb Effects

FV02 has three reverb effects. You can adjust the volume level of those effects by rotating the REVERB to the relevant position. (RM: Room reverb HL: Hall reverb PL: Plate reverb)
Press and hold the footswitch to enter the hidden (Reverb) mode. The footswitch LED will turn YELLOW. In this mode the REVERB knob is unlocked so that you can adjust the guitar reverb effects

Effects List

Voice Tone Mode
Press the TONE button to switch between different vocal tone effects. The color of the TONE LED indicates the selected mode
●(Off: Normal RED: Warm BLUE: Bright)

Output mode
●Individual mode: In this mode the guitar signal will be sent via the GUITAR OUT only. The MIC signal will be sent via the XLR OUT only.

●Mix mode: The guitar signal and MIC signal will be mixed and sent via both the GUITAR OUT and the XLR OUT outputs.

●Switch between modes: Unplug the power supply. Press and hold the footswitch while powering on the pedal. The TONE LED and footswitch LED will blink in red to indicate that the mode has changed.

Line in

Press to turn the line in function on/off. When line in is ON FV01 can be used as a microphone amplifier for the microphone in MIC IN. Alternatively it can also be used as a traditional stompbox.