SNRC 120002 R3 G 1 / 10 1:10 RC CAR RC MODEL standard glass fiber center electric room frame 4WD

SNRC 120002 R3-G 1 / 10 STANDARD GLASS FIBER CENTER ELECTRIC ROOM FRAME 4WD

1.DOUBLE SIDE MID-MOTOR MOUNT

The Mid Motor mount merges with spur gear mount in a single piece with narrow space between two mounts that allow the electronic equipment installed at center to reduce extra steering momentum move when in steering.

2.MID-MOTOR TWISTING CONTROL

The Mid Motor mount design is merged with spur gear mount in a single piece with narrow space between two mounts so it can prevent the belt slip off when twisting in the steering.

3.DOUBLE SIDE MID-MOTOR MOUNT

The Mid Motor mount merges with spur gear mount in a single piece with narrow space between two mounts that allow the electronic equipment installed at center to reduce extra steering momentum move when in steering. Besides since it is symmetric for the motor mount that allow the motor installed in both side.

4.ANTI-ROLL BAR LEVER SHAFT

The new kind of Anti-Roll Bar Lever Shaft is made of S2 spring steel material that provide better strength and is installed lower in the chassis in turn to lower the chassis gravity and reduce the car traction rolling for better stability.

5.SEPARATED SUSPENSION MOUNT

The separated suspension mount is made of 6061 T6 material with option 0.5mm or 1mm thickness selection. For different thickness suspension mount can vary the car traction rolling in different tract condition.

6.SHORTER SHOCK DAMPER

It comes with shorter shock with body diameter 13mm and length 45mm which is 4mm shorter than the old version one. It is made up of 6061 T6 Aluminium material with hard coating which is harder in strength and increase the smoothness in piston movement.

7.LOW GRAVITY SHOCK RETAINER

The shock comes with low gravity shock retainer(-3mm) but it has other type shock retainer(-1mm) as another option.

8.2 KINDS OF C HUB OPTION WITH 2 CASTER

It has 2 kinds of C hub with 2′ or 4′ deg selection but it only comes with one kind in the kit and the other is another option part.

9.SERVO FLOATING MOUNT

The floating servo mount is combined of Aluminum 6061 T6 hard-coated material servo mount and 2.5mm fibre glass plate. The servo installed with the floating mount will not affect the chassis twisting when in the steering and let the chassis rolling and with balance in left/right steering. Besides it comes with longer hex screws and collars that can be mounted to 2nd desk directly to enhance the chassis hardness to adapt different track conditions.

10.LOWER FRONT AND REAR SHOCK TOWER

The front and rear shock tower is lower to work with shorter shock absorber to reduce the traction rolling which is especially useful in high traction track with better steering stability.

11.TWO SEPARATED 2ND DESK

Two separated 2nd desks that can be varied the twisting capability at front and rear separately. Besides it includes the mounting posts to mount to 2nd desk directly to vary the hardness and twisting capability to adapt different track conditions.

12.FOAM BUMPER

The bumper is made of high density foam with high rebounce characteristic to protect the car kit body in large area in case of big crash.

13.ALUMINIUM 30MM AND 40MM FAN MOUNT

With option 30mm &40mm aluminium fan mount can be installed at chassis which is closer to motor the maximize the fan to dissipated the heat on the motor.

14.DRIVING SYSTEM

It is mid motor design with front and rear belt are the same and the pulley is installed at the center. With this design to ensure the driving power is balanced between front and rear tire without any power lost and can have better acceleration. Besides it comes with alloy gear differental front spool universal CVD joint and high precision bearing.

15.SPUR GEAR DIFF GEAR PULLEY GEAR AND PINION GEAR

Spur Gear Gear Diff and Pulley are all made of nylon material. For motor gear it is made by hard coated 7075 material.

16.ALLOY STEEL SCREW BALL HEAD

It comes with grade 10.9 alloy steel screws and nylon mixed ball joint to reduce the friction cover on top of the ball cap.

17.ALUMINIUM 6061 T6 PART

All aluminum parts are made of 6061 T6 hard-coated material with better strength which is produced under high precision CNC machine.

18.ALLOY STEEL CVD AND CAMBER LINK

All CVD shaft universal shaft camber link front and rear spool outdrive anti-roll bar are made of alloy steel material to ensure the stronger strength and relability.

19.6PCS FIBRE GLASS PARTS

6pcs fibre parts such as chassis 2nd desk suspension arm front and rear tower …etc are made of high quality fibre glass material. Besides the chassis are designed in symmetrical at center to make sure the left/right traction rolling is the same and to achieve to reduce the car kit weight.